ASHRAE Guide for Buildings in Hot, Humid Climates

March 30, 2009
ASHRAE Guide to Buildings in Hot and Humid Climates is expanded from 124 to 316 pages

Expanded and revised guidance on keeping heat and humidity out of buildings in hot and humid climates is contained in a new book from ASHRAE, Atlanta, GA.
The second edition of The ASHRAE Guide for Buildings in Hot and Humid Climates, is expanded from 124 to 316 pages and based on years of questions, comments and suggestions from practicing architects, engineers and building managers who work in hot and humid climates, according to author Lew Harriman.
The book includes four new chapters to guide architectural design toward reduced energy consumption, reduced mold risk and lower-cost mechanical systems. The HVACR design section has also been expanded. Six new chapters help system designers quantify and reduce cooling and dehumidification loads, design more economical ventilation systems and save more than 25%of annual HVACR energy through low-cost sealing of air distribution components. Suggestions for contractors are also provided to reduce mold risk and prevent scheduling problems through simple improvements to jobsite practices as well as through modern drying technology.
Chapter summaries allow building professionals to quickly understand the big picture issues and to understand the logic behind suggested best practices for hot and humid climates. The book also provides specific, actionable suggestions for implementing ASHRAE standards for comfort, ventilation and energy efficiency in parts of the world where high heat and humidity can occur at any time of the year.