Latest from Industry News

Redwood Services
redwood
MEMPHIS, Tennessee — Redwood Services, an established home services firm focused on investing in leading HVAC, plumbing, and electrical services companies in growing...
May 27, 2025
Interplay Learning
interplay_learning_logo
Interplay Learning announces winners of 2025 Excellence Awards, recognizing exceptional use of training solutions to drive skill development and business success in skilled trades...
May 27, 2025
Hansen Super Techs
hansen_mothers_day
Hansen Super Techs surprises Janet Massey, a dedicated mother from Wilmer, Alabama, with a free A/C unit worth up to $10,000, highlighting their commitment to supporting the community...
May 22, 2025
187695414 © David Spates | Dreamstime.com
dreamstime_xxl_187695414_1_resized
In response to the industry shortage of R-454B cylinders, Rheem to increase the factory charge to minimize disruptions.
May 22, 2025
Malco Tools
Malco Tools celebrated its 75th anniversary during a ribbon-cutting ceremony on Saturday, May 17, 2025. Pictured, from left to right: The Malco Group CFO Mike Hemmesch, Wright County Commissioner Tina Diedrick, Annandale Mayor Shelly Jonas, The Malco Group CEO Rich Benninghoff, members of the founding Keymer family: Gerry, Dave and Paul Keymer, former Malco executive Don Schmidt, and The Malco Group director of engineering Greg Guse.
From its humble beginnings in a Minneapolis garage to becoming an employee-owned ESOP, Malco Tools has a legacy of innovation and commitment to creating an outstanding workplace...
May 21, 2025
ACCA
acca_logo
ACCA's R-454B Resource Center addresses challenges faced by HVACR contractors amid the refrigerant shortage. It offers FAQs, A2L refrigerant safety training, guidance from manufacturers...
May 21, 2025
58776150 © Apartura | Dreamstime.com
dreamstime_xxl_58776150
Warm Air Furnaces U.S. shipments of gas warm air furnaces for March 2025 changed +20.1 percent, to 298,639 units, compared to 248,582 units shipped in March 2024. Oil...
May 20, 2025
31351904 © Jeff Wasserman | Dreamstime.com
dreamstime_xxl_31351904
An in-depth look at the 2024 OSHA workplace safety violations, offering a comprehensive overview of the most cited federal standards.
May 20, 2025
Arkema
arkema_forane_resized
The expansion of Arkema’s portfolio through a commercial arrangement with Honeywell International Inc. will strengthen global supply chains, address increased demand for HFO blends...
May 19, 2025

Copper Correction Coming?

Copper and all metals could be ready for a rebound.
July 25, 2022
4 min read
Terry McIver
Copper Pipes 62ded180d0cc1

After closing lower for six consecutive weeks, and giving up $1.24 along the way, copper got a reprieve last week, with a reminder that a correction may be coming. It’s not limited to copper though, as all metals are ready for a bounce.

Whether we simply look at the charts and see the precipitous drop in prices over the past several months, or take the more technical approach using the Relative Strength Index and/or Stochastics, they are all telling us the same thing – that is, markets are very oversold.

From a different perspective, prices have fallen in the face of rock bottom inventories. Indeed, total inventories now stand at just 730,603 metric tonnes as the first chart in the link below illustrates, while the Base Metals Barometer has fallen to an 18-month low. As a point of reference, we have to go back 31 years to 1991 when stocks were last this low.

Logically, one is hard pressed to explain falling prices while inventories are also falling, but at the risk of repetition, markets are not always logical. That said, perhaps prices were responding to the sharply stronger dollar, or rising interest rates, or fears of a recession.

JULY 22 PRICE AND INVENTORY REPORT

In any event, looking at copper specifically, the Spot price closed at a record high $4.93 on March 4th, and since then it has declined $1.70, or 34% to the recent low of $3.23 on July 15th. Assuming a simple 50% correction from the low, we are looking at a potential bounce of 85 cents, which could take copper back to $4.08. Using this same approach, the other members of the nonferrous team could see prices also enjoying a bit of a correction. Aluminum could revisit $1.40; lead - $1.00; tin - $16.08; nickel - $15.27, and zinc $1.68.

Precious Metals

How about the precious metals? Silver was $28 in June of 2021, but has fallen almost $10, or 36% to about $18.00. A 50% correction here could bring silver to $23. Likewise, gold could see $1,840 again. Interestingly, copper, aluminum and nickel are at or close to key support lines, as is the Base Metals Barometer, representing all nonferrous metals. And take a look at the precious metals – here too you can see all of them at important support lines. The S&P 500 rose to a record high 4,797 in January, but fell to the recent low of 3,667 last month. A 50% correction here could bring it back to 4,230. A long shot for all of this? Maybe, but we’ll see.

Why Would markets Correct?

Why would markets correct? Some people will see the lower prices providing a buying opportunity, relative to where they were. Others will cover short position to take profits, or limit losses. While still others will look at the fundamentals, to include the nearly empty exchange warehouses and conclude that prices are bound to rebound.

On the other side of this correcting coin, headlines, news reports and various commentators are telling us on a daily basis that a recession is right around the corner, and the Fed is going to raise interest rates again to continue the fight against inflation. That’s a tough one. We’ve already seen a slowdown in building and real estate activity, and many commodity prices have also declined. Further, announcements of job cuts in the tech and crypto industries have been made, along with Ford advising that some 8,000 jobs will be eliminated.

Anyway, if you believe sharply higher energy prices are associated with recessions, or the 2-  and 10-year inverted yield curve predicts a recession, then one is on the way. The remaining questions are: how long and how deep?

About the Author

John E. Gross

President

John Gross is President of J.E. Gross & Co. a metals management and consultancy firm he established in 1987, to assist companies in their procurement of metals, scrap recycling, and price risk management.

In addition to his consulting activities, Mr. Gross has worked with global leaders in the metals industry over the past 45 years.

Sign up for Contracting Business Newsletters
Get the latest news and updates.