Image

Commissioning 'TLC' Works Wonders for Commercial Refrigeration

Feb. 10, 2014
Commissioning for maximum performance was one of the topics for discussion during the ContractingBusiness.com Refrigeration Roundtable, held during Comfortech 2013 in September of 2013 in Philadelphia, PA. We asked our contractor and supermarket manager panelists to share their opinions on store commissioning, how often they commission, and some word about results.

Just like their HVAC counter -“parts,” supermarket refrigeration systems need commissioning and recommissioning, in order to maintain peak performance and make the most of today’s energy-efficient refrigeration systems.

Commissioning for maximum performance was one of the topics for discussion during the ContractingBusiness.com Refrigeration Roundtable, held during Comfortech 2013 in September in Philadelphia, PA. We asked our contractor and supermarket manager panelists to share their opinions on store commissioning, how often they commission, and some word about results.

Refrigeration Roundtable sponsor representatives listen to the discussion. From left are Dale Sizemore, Nate Sung, and Dustan Atkinson, all with Kysor/Warren; Michael Garry, who shared co-moderator duties with Terry McIver of ContractingBusiness.com; and Tim Beck and John Post, with Resource Data Management.

, manager of refrigeration and store service for Weis Markets, said commissioning and recommissioning is a regular event at Weis stores.

“We commission new stores within two weeks of opening. We see a payback in about a year and a half, so it’s a good payback,” Burd said. “The key to commissioning is keeping it in that condition. We lock the controllers once we have the stores setup where we want them to be. It sometimes upsets the technicians, because it’s easy for them to go in and raise or lower a set point by two pounds. But that’s energy. The key is to keep the system in that condition and not let things get changed.

Burd also commissions outside air dampers. “When we do an air balancing, we make sure we mark the dampers’ position during commissioning, because a technician, when he’s out there in the middle of the night and feels the store is warm or humid, blames it on outside air. So he cranks the outside air dampers and walks away from it. Yes, the building cools back down, but we make sure we have that mark to go back to, and keep things fine tuned. We’ll probably go back every three to five  years to perform recommissioning on a store.”

“We meter everything in our stores: compressors, condensers, circuit loads,
HVAC, everything,” Burd said.“He drillls down on an individual store,
and when he notices excessive energy usage, goes into the
system to see if things are in override or not
running, whatever it may be.”

Burd shared that Weis Markets brings in a third-party individual to monitor utility bills. “We meter everything in our stores: compressors, condensers, circuit loads, HVAC, everything,” he said. “He drillls down on an individual store, and when he notices excessive energy usage, goes into the system to see if things are in override or not running, whatever. it may be.”

The Refrigeration Roundtable was made possible by the generous support of these leading companies.

, procurement manager for Sprouts Farmers Market, added that commissioning can have an, “incredible” imact on a store environment.

“No matter how experienced or good the contractor is, if you’re not commissioning your store when it’s new, or when it’s remodeled, you’re not getting what you expect,” Hagen advised.

“With commissioning, both the store owner and the contractor who is servicing the store win. And you can see the energy impact between a commissioned and non-commissioned store.”

Hagan said he had a methodical approach to commissioning when he was more active in the process at the store level. “My approach to recommissioning was always to take about 10% of the worst performing stores and recommission them. And just keep doing that. Every month, you recommission the 10% worst stores, and it just seems to continue to drive the energy costs down.”

“When you finish a new store or a remodeling project, that to me is the golden opoportunity for commissioning, because, unless something is way out of whack, we simply don’t have the resources to do recommissioning on any kind of regular schedule,” offered Harrison Horning, director of energy and facilities for Hannaford Brothers.

“The second point is that it goes beyond refrigeration and HVAC. You’ve got to be looking at electrical and plumbing, because some of those things can have an adverse impact on the operation of refrigeration and HVAC as well,” Horning said. “Controls are clearly involved, but a plugged plumbing drain could tie-in with iced up coils; and there’s a long list of electrical issues that can come back to cause problems down the road, in terms of operation and energy efficiency.”

Contractor Joe Gallego, special projects manager for Bay State Cooling, Bridgewater, MA,said some technicians are better suited for commissioning than others, so make the assignment wisely.

“The guys that like to put out fires don’t like to spend time fine tuning,” Gallego said. “They want to get the ice cream case cold again, and go off to the next call.”

Gallego said he and company president Dave Kjelgaard select technicians for projects based on their performance. “As a contractor, it behooves you to put the right guy in there, to keep your costs down, so you can make margin on that call.”

Frank Vadino, president of Cold Technology, Blackwater, NJ, said his firm is fortunate to have predominantly independent stores as its major customers. These customers rely on Frank and his team for many services.

“They rely on us for design services, store planning services, and contracting services So, we’re a contractor on one hand, but something like a small chain store on the other. We design the system, as efficiently as possible. We program the control systems to execute the strategies that will run the store as efficiently as possible.

“We also lock the control systems down, so our technicians can’t make changes. That puts us in a position that supports perpetual commissioning.”

“The majority of the time, we’ve moved to using heat reclaim for purposes that are more efficient, with lower heads and so forth,” shared Richard Luhm, president, Memphis Mechanical.

“Motor rooms are generally close to the backrooms. We’ve mounted a couple evaporators in the back and use heat reclaim for backroom heat. That’s where we can’t run unit heaters quite as much,” Luhm said.